Setting or changing your DNS Settings
Our new primary DNS is 216.64.180.11 and the secondary DNS is 207.170.227.121.
If you have any questions regarding this matter, please email customer service at spokane@sisna.com or call us at (509)535-1169 Spokane
or (866) 467-4762 in Idaho or (866) 467-4762 in Davenport.or after hours call (866) 467-4762.
To change this in Windows ’95, double click on the My Computer icon and
then double click on your Dial up Networking folder. There should be two icons in
the folder. One will say Make New Connection and the other one will say SISNA. Highlight
the SISNA icon and click on the right mouse key and go to where it says properties.
A window will pop up that contains the dial up phone number as well as your modem
information. Now go to the Server Types tab and push the TCP/IP Settings
button. On the window that pops up, change your primary DNS to 216.64.180.11 and your
secondary DNS is 207.170.227.121. Now click OK and click OK again on the next pop-up window.
Once this is completed, you should be in the My Computer icon. Now, open up the Control
Panel folder and locate and open the Network icon. Now, highlight where it says
TCP/IP and click on properties. If you have more than one item that says
TCP/IP, highlight the one that says TCP/IP dial up adapter. From there go to the DNS
configuration tab. If this is disabled, you do not need to enter anything in. Click OK
and then Click OK again and you are done. If it is enabled, remove the settings that
entered in under DNS server search order. Enter in 216.64.180.11 and click on add. In the
same box, enter in 207.170.227.121 and click on add.
Now click on the Gateway tab. If a Gateway is installed, go ahead and remove it. Now click
OK, then click OK again. A window will come up and asking you to re-boot your computer.
Click Yes and your computer will reboot. When everything comes back up, try to connect
again.
If you are using Windows 3.X, open up your dialer and click on Properties.
Then go to the Service Provider or TCP/IP tab. Change the primary DNS to
216.64.180.11 and the secondary DNS to 207.170.227.121.
If you are using Trumpet Winsock, go to your File pull down menu and go to setup.
The third line from the top is your Name Server. Delete the numbers that are in
there and enter in the primary DNS of 216.64.180.11, put in a space and then enter in the
secondary DNS of 207.170.227.121. Click OK and exit out of Trumpet.
If you are using a Macintosh, go to your Control Panel and find either MacTCP or
TCP/IP. Follow the instructions for the one that you have.
MacTCP:
1. Open the MacTCP control panel and hit the 'more' button.
2. In the lower right hand corner of the window change the settings as follows:
Domain Name IP Address
sisna.com........216.64.180.11
216.64.180.11
207.170.227.121
3. Close your MacTCP control panel and restart your Macintosh.
TCP/IP:
1. Open the TCP/IP control panel.
2. In the Name Server Address section change the numbers to the following:
216.64.180.11
207.170.227.121
3. Close your TCP/IP control panel and save the changes.